Water Softener Maintenance in Bruce, SD

Water Softener Maintenance in Bruce, SD

Water softener maintenance in Bruce, SD keeps a system running for years without surprise failures. Most softeners don't need much, but they do need someone to look at them once a year or so.

A maintenance visit from Bruce, SD Water Softener Installation covers:

• A hardness test before and after the softener
• Checking the salt level and breaking up any bridge
• Running a manual regeneration and watching each cycle
• Confirming brine draw and refill volumes
• Cleaning the injector and its screen
• Inspecting the bypass and the drain line air gap
• Resin cleaner treatment if your water has iron
• Resetting the clock and hardness after a power outage

Small issues show up early this way. A slow brine draw tells us the injector is starting to clog. A slight drip at the drain line during service mode tells us the piston seals are wearing. Catching those now costs far less than a full valve rebuild later.

We also look at the salt setting. Many softeners leave the factory set to use more salt than they need. Turning the dose down to a more efficient level can cut salt use noticeably without losing soft water.

For water softener maintenance in Bruce, SD, call Bruce, SD Water Softener Installation at (833) 995-0133.